Yellow Silicone Connector Seal

967067-2 Cavity Plug — Seal the Holes You're Not Using

Connector housings ship with empty cavities all the time. Water, dust, salt spray — they don't care which hole is wired and which one isn't. A Yellow Silicone Connector Seal like the 967067-2 plugs the unused position and keeps the housing rating intact. No leaks, no corrosion creeping in from the blind side. Triple-rib profile locks into the cavity and stays seated through vibration and thermal cycling.

Product Parameter (Specification)

How We Keep Quality from Wandering

One inspector and one machine, standing next to each other on the same line. The automated optical system catches dimensional drift, flash, and surface defects faster than any human eye can. The inspector handles what the camera can't — feel, fit-checking against a cavity gauge, spotting subtle molding anomalies that a screen might miss. They don't replace each other. They back each other up. Every Yellow Silicone Connector Seal passes both gates before it goes into the bag.

IATF 16949 from Inbound to Outbound

Raw silicone compound lands in our warehouse with a certificate and a sample — we test it before it touches a mold. Cure parameters are locked per batch recipe, not eyeballed. In-process checks run at fixed intervals, not randomly. Finished goods go through a final audit against the production lot card before release. The whole chain — material, molding, inspection, packing — runs under one IATF 16949 system. Same standard, same discipline, same paperwork from the first gram of compound to the last carton out the door. That's how you keep yield consistent and warranty claims rare.

When the Mold Gets It Right, the Seal Does Its Job

The 967067-2 comes off a dedicated tool maintained in-house — not a generic shop mold shared with someone else's part number. Lip geometry, draft angle, gate position: all dialed in for this specific cavity plug. No flashing around the parting line, no knit lines weakening the ribs. A clean mold makes a clean seal, and a clean seal doesn't leak.